LC1D09BD TeSys KONTAKTOR 9A, 24VDC SCHNEIDER
| range |
TeSys
|
|
|---|---|---|
| product name |
TeSys D
|
|
| product or component type |
Contactor
|
|
| device short name |
LC1D
|
|
| contactor application |
Motor control
Resistive load |
|
| utilisation category |
AC-4
AC-1 AC-3 |
|
| poles description |
3P
|
|
| power pole contact composition |
3 NO
|
|
| [Ue] rated operational voltage |
Power circuit <= 690 V AC 25…400 Hz
Power circuit <= 300 V DC |
|
| [Ie] rated operational current |
9 A 60 °C) <= 440 V AC AC-3 power circuit
25 A 60 °C) <= 440 V AC AC-1 power circuit |
|
| motor power kW |
2,2 kW 220…230 V AC 50/60 Hz AC-3)
4 kW 380…400 V AC 50/60 Hz AC-3) 4 kW 415…440 V AC 50/60 Hz AC-3) 5,5 kW 500 V AC 50/60 Hz AC-3) 5,5 kW 660…690 V AC 50/60 Hz AC-3) 2,2 kW 400 V AC 50/60 Hz AC-4) |
|
| motor power HP (UL / CSA) |
1 hp 230/240 V AC 50/60 Hz 1 phase
2 hp 200/208 V AC 50/60 Hz 3 phases 2 hp 230/240 V AC 50/60 Hz 3 phases 5 hp 460/480 V AC 50/60 Hz 3 phases 7,5 hp 575/600 V AC 50/60 Hz 3 phases 0,33 hp 115 V AC 50/60 Hz 1 phase |
|
| control circuit type |
DC standard
|
|
| [Uc] control circuit voltage |
24 V DC
|
|
| auxiliary contact composition |
1 NO + 1 NC
|
|
| [Uimp] rated impulse withstand voltage |
6 kV IEC 60947
|
|
| overvoltage category |
III
|
|
| [Ith] conventional free air thermal current |
25 A 60 °C power circuit
10 A 60 °C signalling circuit |
|
| Irms rated making capacity |
250 A 440 V power circuit IEC 60947
140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 |
|
| rated breaking capacity |
250 A 440 V power circuit IEC 60947
|
|
| [Icw] rated short-time withstand current |
105 A 40 °C – 10 s power circuit
210 A 40 °C – 1 s power circuit 30 A 40 °C – 10 min power circuit 61 A 40 °C – 1 min power circuit 100 A – 1 s signalling circuit 120 A – 500 ms signalling circuit 140 A – 100 ms signalling circuit |
|
| associated fuse rating |
10 A gG signalling circuit IEC 60947-5-1
25 A gG <= 690 V type 1 power circuit 20 A gG <= 690 V type 2 power circuit |
|
| average impedance |
2,5 mOhm – Ith 25 A 50 Hz power circuit
|
|
| [Ui] rated insulation voltage |
Power circuit 690 V IEC 60947-4-1
Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL |
|
| electrical durability |
0,6 Mcycles 25 A AC-1 <= 440 V
2 Mcycles 9 A AC-3 <= 440 V |
|
| power dissipation per pole |
1,56 W AC-1
0,2 W AC-3 |
|
| Front cover |
With
|
|
| mounting support |
Plate
Rail |
|
| standards |
CSA C22.2 No 14
EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
|
| product certifications |
LROS (Lloyds register of shipping)
CSA UL GOST DNV CCC GL BV RINA |
|
| connections – terminals |
Power circuit screw clamp terminals 1 1…4 mm²flexible without cable end
Power circuit screw clamp terminals 2 1…4 mm²flexible without cable end Power circuit screw clamp terminals 1 1…4 mm²flexible with cable end Power circuit screw clamp terminals 2 1…2,5 mm²flexible with cable end Power circuit screw clamp terminals 1 1…4 mm²solid without cable end Power circuit screw clamp terminals 2 1…4 mm²solid without cable end Control circuit screw clamp terminals 1 1…4 mm²flexible without cable end Control circuit screw clamp terminals 2 1…4 mm²flexible without cable end Control circuit screw clamp terminals 1 1…4 mm²flexible with cable end Control circuit screw clamp terminals 2 1…2,5 mm²flexible with cable end Control circuit screw clamp terminals 1 1…4 mm²solid without cable end Control circuit screw clamp terminals 2 1…4 mm²solid without cable end |
|
| tightening torque |
Power circuit 1,7 N.m screw clamp terminals flat Ø 6 mm
Power circuit 1,7 N.m screw clamp terminals Philips No 2 Control circuit 1,7 N.m screw clamp terminals flat Ø 6 mm Control circuit 1,7 N.m screw clamp terminals Philips No 2 |
|
| operating time |
53.55…72.45 ms closing
16…24 ms opening |
|
| safety reliability level |
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
|
| mechanical durability |
30 Mcycles
|
|
| maximum operating rate |
3600 cyc/h 60 °C
|
| coil technology |
Built-in bidirectional peak limiting diode suppressor
|
|
|---|---|---|
| control circuit voltage limits |
0.1…0.25 Uc −40…70 °C drop-out DC
0.7…1.25 Uc −40…60 °C operational DC 1…1.25 Uc 60…70 °C operational DC |
|
| time constant |
28 ms
|
|
| inrush power in W |
5,4 W 20 °C)
|
|
| hold-in power consumption in W |
5,4 W 20 °C
|
|
| auxiliary contacts type |
Mechanically linked 1 NO + 1 NC IEC 60947-5-1
Mirror contact 1 NC IEC 60947-4-1 |
|
| signalling circuit frequency |
25…400 Hz
|
|
| minimum switching current |
5 mA signalling circuit
|
|
| minimum switching voltage |
17 V signalling circuit
|
|
| non-overlap time |
1,5 ms on de-energisation between NC and NO contact
1,5 ms on energisation between NC and NO contact |
|
| insulation resistance |
> 10 MOhm signalling circuit
|
|
| contact compatibility |
M4
|
|
| compatibility code |
LC1D
|
|
| motor power range |
1,1…2 kW 200…240 V 3 phases
2,2…3 kW 380…440 V 3 phases 4…6 kW 380…440 V 3 phases 4…6 kW 480…500 V 3 phases |
|
| motor starter type |
Direct on-line contactor
|
|
| contactor coil voltage |
24 V DC standard
|
